Inspection date: July 15, 2025

inspection station: Jurye Automobile Inspection Center

Inspection category: regular inspection

Driving distance during inspection: 16,069km

Target: Vehicles manufactured between (June 11, 2019 - February 10, 2021)

Contact us: Cadillac main number: 080-800-1228

target device: Power transmission device, etc.

Defect details: <p>If the inside of the hydraulic control device of an automatic transmission wears out over time, there is a possibility that the valve may malfunction unintentionally due to a drop in pressure due to oil leakage. As a result, if shifting shock or rare momentary wheel locking occurs while driving, the risk of a vehicle collision increases, which may impede safety. </p>

Recall Post Date: April 11, 2025

Correction method: <p> - Update the diagnostic software of the automatic transmission control module </p><p> - Replace the automatic transmission hydraulic control unit when the relevant engine warning light is checked after updating the diagnostic software </p><p> ​ * If an abnormality is detected through the update of the diagnostic software of the automatic transmission control module, it is limited to a specific gear to prevent wheel locking. It prevents the possibility of occurrence in advance and causes the engine warning light and message to appear at the same time</p><p> * In addition, the warranty period for the automatic transmission hydraulic control device has been extended to 180 months or 240,000km (warranty period: period or mileage, whichever comes first, is considered the expiration of the warranty period)</p>

Correction period: From April 11, 2025

Target: Vehicles manufactured between (June 19, 2019 - February 10, 2021)

Contact us: Cadillac main number: 080-800-1228

target device: Prime mover (power generation device) Others

Defect details: <p>The engine installed in this vehicle is equipped with a system that allows evaporative gases generated during the fuel supply process to be reused during the combustion process rather than being released directly into the atmosphere. However, a problem occurred with the PCB board (integrated circuit board) and pump bearing within the evaporative gas emission canister purge pump, which is one of the components of this system, and the engine warning light came on. and recall due to the confirmed possibility of exceeding the regulated emission levels </p><p><br></p><p><Production date for each target vehicle></p><p>CT4: 2019.11.01~2021.01.25</p><p>CT5: 2019.06.19~2021.02.10</p>

Recall Post Date: February 11, 2025

Correction method: <p>Check the installed purge pump specifications and replace the purge pump if necessary </p><p><br></p><p><However, in the case of some vehicles, <b><u><span style="font-size: 10pt;">have already received the same corrective action according to warranty repair measures and must additionally visit the service center to take corrective action. You may not need to receive it, so please contact the manufacturer's customer service center (080-800-1228) for further details.</span></u></b>

Correction period: From February 11, 2025

Target: Vehicles manufactured between (August 4, 2020 - February 10, 2021)

Contact us: Cadillac main number: 080-800-1228

target device: Prime mover (power generation device) Others

Defect details: <p>Due to an error in the ECM calibration internal code, excessive compensation is performed for oxygen sensor aging in relation to the purification catalyst OBD (On-Board Diagnostics) under certain conditions. In this case, when the efficiency of the purification catalyst deteriorates, it is not properly monitored, leading to failure. Recall due to the possibility that the indicator light (MIL: Malfunction Indicator Lamp) may not be activated (*Vehicles equipped with purification catalysts with reduced efficiency may emit more exhaust gas than legal requirements)</p><p><br></p><p><*By target vehicle Production date></p><p>Cadillac CT4: 2020.08.04~2021.02.10</p><p>Cadillac CT5: 2020.08.04~2021.02.10<br></p>

Recall Post Date: December 22, 2023

Correction method: <p>Reprogram the Engine Control Module</p>

Correction period: From December 22, 2023

Date of change: April 2022

Address after change: Buk-gu, Busan

Classification of change: Change registration

Target: Vehicles manufactured between (June 11, 2019 - February 10, 2021)

Contact us: Cadillac main number: 080-3000-5000

target device: Riding and indoor equipment, etc.

Defect details: <div>Recall due to the possibility that the curtain airbag may have been installed in the vehicle in a twisted state when assembled, and in this case, the curtain airbag may not deploy normally and may not properly perform its role in protecting passengers, which may impair safety. </div><div><br></div><div><*By target vehicle Production date><br>Cadillac CT4: 2019.11.01~2020.08.21<br>Cadillac CT5: 2019.06.11~2021.02.10</div>

Recall Post Date: September 7, 2021

Correction method: <p>Check the curtain airbag assembly and reassemble if incorrect assembly is confirmed. </p>

Correction period: From September 7, 2021

first time buyer: No information

Date of production: No information

New car list price: No information

Production country: No information

New car delivery price: No information

First registration date: No information

Address at time of purchase: Haeundae-gu, Busan

Target: Vehicles manufactured between (August 4, 2020 - February 10, 2021)

Contact us: Cadillac main number: 080-3000-5000

target device: Electrical equipment and other

Defect details: <p>If a communication error in the airbag control device occurs due to a software error in the communication gateway module, the airbag warning light may not light up intermittently when it should. (If a communication error in the airbag control device occurs while driving, the airbag warning light comes on normally, but if the communication error continues during the next engine start, it may not come on.) Software of the communication gateway module (CGM-Communication Gateway Module)* Transfers data from various devices/modules to other devices. A device that transmits data to a device/module (instrument panel) A device that transmits data from various devices/modules to other devices/modules (instrument panel) Due to a software error in the communication gateway module, communication error information from the airbag control device may not be transmitted to the instrument panel intermittently. In this case, the airbag warning light may not light and the driver may not recognize it. Recall due to possible safety hazards (however, the airbag operates normally, and the message “Airbag system maintenance required” appears normally in the information window)</p>

Recall Post Date: June 25, 2021

Correction method: Software updates for communication gateway modules

Correction period: From June 25, 2021